COLUMN

タグホイヤー _ clock _ repair

"Movement of favorite タグホイヤー worsened". Where should I ask for the repair?
In addition, I want to know the maintenance method to be able to perform by oneself to be usable for a long time
To you who have such a question. With this article about a repair method of タグホイヤー,

  • Repair contents and expense
  • Should I repair it in regular shop and which of the private repair supplier?
  • Maintenance method to have by oneself

I comment on above-mentioned three in detail.

I can understand a repair expense and repair contents in detail by reading an article, and the body gets the knowledge about the maintenance.
Please refer to it.

About repair of タグホイヤー

There is 2 択 of "the overhaul" that I dismantle "maintenance service" to repair a bad point partially and all the inside in repair contents of タグホイヤー, and check repairs.
It is something like car inspection when I compare the overhaul by car. The car inspection has you check all the inside of the car once in 2-3 years and has you repair a bad point.

The overhaul has you check all the parts in the like clock and has I repair the point that became bad and change it.

Overhaul is essential if I use タグホイヤー all the time

The overhaul is essential if I continue using タグホイヤー for a long time.

There is a part more than 100 in the clock inside of タグホイヤー, and those parts wake up abrasion or damage by continuing using it for a long time, and this is because it does not move.

Therefore the overhaul is essential, and it is necessary to perform it regularly to continue using the clock for a long time.

Frequency of the overhaul

The frequency of the overhaul changes by a mechanical clock or a quartz-type clock.

As for the mechanical clock, as for the quarts watch, 4 once a year is rough aims once in 4-6 years. But, by the state of preservation of use environment and the clock, the frequency will be careful in different one.

For example, in people wearing a chronograph as a fashion item with a person using a chronograph for the measurements such as sports, it is obvious that there is a difference in the use situation. I add one's use situation and state of preservation well, and let's examine overhaul.

The period that overhaul takes

As for the overhaul, the period of approximately 5-6 weeks quite hangs over the regular shop for approximately 2-4 weeks after leaving it if it is a private company.
But let's be careful when part exchange is necessary because a period of the finish becomes long.

The rate that overhaul costs

The rate that overhaul costs varies according to the type of the clock of the errand. The rate rises so that a drive type is complicated.

I will watch a rate when I repair it in a store specializing in clock repair of the private company when I repair it in a regular shop.

When I perform it in a regular shop

When I overhaul it in a regular shop, the amounts of money every clock type are as follows. (at June, 2020)

Movement Type Standard price Edward clubber price

A collection

Quartz clock

Three stitches

¥41,250

¥27,500

A collection

Quartz clock

Chronograph

¥57,750

¥38,500

A collection

Mechanical clock

Three stitches

¥57,750

¥38,500

A collection

Mechanical clock

Chronograph

¥74,250

¥49,500

B collection

Quartz clock

Three stitches

¥41,250

¥27,500

B collection

Quartz clock

Chronograph

¥59,400

¥39,600

B collection

Mechanical clock

Three stitches

¥59,400

¥39,600

B collection

Mechanical clock

Chronograph

¥75,900

¥50,600

C collection

-

Three stitches

¥72,600

¥48,400

C collection

-

Chronograph

¥94,050

¥62,700

D collection

All

All

¥94,050

¥62,700

E collection

All

All

¥204,600〜

¥136,400〜

F collection

All

All

Eatimate

Eatimate

B collection

  • Autavia
  • Carrera
  • Monaco
  • Monza

C collection

  • G-Carrera

D collection

  • キャリバー 36
  • Monaco24

E collection

  • H02T

F collection

  • Vintage

※The A collection removes B - F collection
※I quote it from タグホイヤー official site
※Because the price may be changed without a notice,Official sitePlease confirm をご.

When I perform it in a private company

When I repair it in a private company, a rate becomes cheaper than I overhaul it in a regular shop.

It cannot be said in the rate varying among suppliers to depend on unconditionally, but may think, "the 30% degree almost becomes cheaper".

But confirmation is necessary beforehand because I may not cope depending on the kind of the clock in a private company.

Merit demerit of a shop overhauling タグホイヤー

When I ask it for overhaul, where should I depend on? It is thought that an at a loss person has much と.
In this item, I commented on the merit demerit of each shop which I overhauled.

Regular shop

Merit

  • A reliable first-class engineer copes
  • There is security

Demerit

  • A rate is high
  • Repair takes time

The rate is high, but, as for the worry in the repair, there are none really when I depend in a regular shop. Because a first-class engineer copes with any type of clock, there is great security.

Store specializing in clock repair

Merit

  • A rate is lower than a regular shop
  • I have you repair it earlier than a regular shop

Demerit

  • A difference is reflected on a technical aspect by a store
  • I may not cope by the type of the clock

It is the greatest merit that I can perform the store specializing in clock repair at a low rate than I perform it in a regular shop. But a technical aspect cannot deny that a difference appears by a store to depend on.

Let's depend whether word of mouth and the results, one's clock can support when they depend after checking it in detail beforehand.

Household appliance general merchandising store

Merit

  • I can leave a clock in a shopping occasion

Demerit

  • I do not see the face of the worker (with the uneasiness)

It is a big merit that the household appliance general merchandising store can drop in aimlessly in a shopping occasion.

However, who will repair it, and the uneasiness whether I may trust comes.
Let's confirm it well without depending just because of low price easily.

Let's leave the repair to a regular shop

As a result of having been based on the merit mentioned above, it "is repair in the regular shop" to recommend.
It is "as I gave even a merit when it is said why I should repair it in a regular shop because there is great security in" repair. Most purchase the high-quality clock such as タグホイヤー as a clock usable throughout the life, and a day to hand it to one's child sometime soon may come.

I spend money on repair to use such an important clock for a long time to some extent, and should I not ask a reliable engineer? It is not a so high rate if I think that I am usable by one repair in peace for 3-5 years even if it is said that a rate is high. In addition, I may have large amount of buy it if maintenance is done well even if I did not use it.

Based upon the foregoing,タグホイヤーIt is recommended that the の repair entrusts in a regular shop.

I can do it by oneself! Maintenance method of タグホイヤー

I maintain it by タグホイヤー _ oneself

Maintenance to perform by oneself is essential to continue keeping a high-quality clock a normal state. In this item, I comment on a maintenance method to be able to perform by oneself.

Timing of a maintenance method and the maintenance of the band (belt) of タグホイヤー

Let's wipe off the leather belt which is vulnerable to sweat and water with tender cloth as soon as we got wet. It is a point to wipe to absorb moisture without strongly rubbing it.

In the case of the belt of the metal material, I will wipe it with dry crosses such as the microfiber or chamois leather.
The cloth that the surface feels rough may damage a belt. The dirt which was in the gap of the belt will be eliminated with cotton swabs.

Matters that require attention of a method and the maintenance to take a dirt and the wound of the glass part

I can take a dirt and the wound of the glass part with exclusive wound collecting cream and cleaner. It is that a wound may be outstanding adversely when I use cream and the cleaner different in the use that want to be careful.

Because there is the cream of the type that I cannot use for glass, it is good and will watch a use use before use.

Matters that require attention when I maintain it by oneself

When I maintain it by oneself, the inside will leave you as a chisel for lateral part without performing it.

This is because it will not be recoverable after having disintegrated when it is going to maintain it to the inside without knowing the structure of the clock.

It is not the thing which the structure of the clock can understand an amateur, and is simple. The clock functions by a part more than 100 and complicated mechanism.
The number of parts exceeds 1000 if it becomes the complicated clock such as the mechanical clock.

It does not function normally when I dismantle such a complicated clock and becomes ハメ to take in a repair shop after all.
So I will leave you as only outside maintenance without starting the fight inside when I maintain it by oneself.

Summary

This timeタグホイヤーI explained it about the maintenance method that there was by expense, oneself who started a repair method and the repair of the の clock.

I leave it with a regular shop, and the method of the repair has the method to leave with a store specializing in clock repair and the household appliance general merchandising store, but it "is a method to have you repair it in a regular shop" that is the recommended.

I may think with cheap investment even if it costs to some extent if usable in peace for 3-5 years.

In addition, let's perform the self-maintenance regularly to continue using it beautifully forever. Seem to leave it only in the outside on this occasion without meddling with the clock inside; attention.